描述
| Model Number | RYH751F5-VV2 |
| Applicable motor output [kW] | 0.75 |
| Outer frame number | 2a |
| Phase | Single-phase, 3-phase |
| Voltage / frequency | 200 to 240VAC 50/60Hz |
| Allowable voltage fluctuation | 3-phase : 170 to 264 VAC, Single-phase : 180 to 264 VAC |
| Control system | Fully-digital sinusoidal PWM drive |
| Built-in resistor | 20 |
| External resistor | 50 |
| Feedback | INC 20bit/rev, ABS/INC 18bit/rev |
| Overload capability | 300% / 3 sec |
| Speed control | Closed loop control with speed adjuster, acceleration/deceleration time setting, manual feed rate/max. rotation speed, speed command zero clamp, etc |
| Number of position data sets | 15-point (position, speed, acceleration/deceleration time setting, timer, M code and various statuses) |
| Positon control | Closed loop control with position adjuster, electronic gear, output pulse setting, feed forward, homing, interrupt positioning, auto startup, etc. |
| Torque control | Closed loop control with current adjuster (proportional open loop control of current and torque), torque limit, speed limit at torque control, etc |
| Accessory functions | Easy tuning, profile operation, sequence test mode, auto tuning, auto notch filter, vibration suppressing online learning, etc. |
| Operation and display section of main body(keypad) | 4-digit alphanumeric display with 7-segment LED 4 operation switches (MODE, SET, UP and DOWN) |
| Installation place | Indoors at altitude ≤ 1000m, free from dust, corrosive gases and direct sunlight In case of compliance with CE marking: pollution degree 2, over voltage category III |
| Temperature / humidity | -10 to 55°C/10 to 90%RH (without condensation) |
| Vibration / shock resistance | Vibration resistance: 3mm: 2 to 9Hz or less, 9.8m/s2: 9 to 20Hz or less, 2m/s2: 20 to 55Hz or less, 1m/s2: 55 to 200Hz or less Shock resistance: 19.6m/s2 (2G) |
