| Model |
AP-C31W |
| Type |
Negative pressure |
| Rated pressure |
0 to -101.3 kPa |
| Fluid type |
Air or non-corrosive gases |
| Type of pressure |
Gauge pressure |
| Display |
3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s |
| Operation indicator |
Red LED x 2 (corresponding to control output 1 and 2) |
| Display resolution |
Normal mode: 0.1 kPa, Focus mode: 0.01 kPa |
| Power consumption |
Normal |
12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1 |
| Display temperature characteristic |
±1 % of F.S. max. |
| Hysteresis |
Variable (Standard: 0.5 % of F.S.)*2 |
| Response time (Chattering prevention function) |
2.5, 5, 100, or 500 ms (selectable) |
| I/O |
Analogue output |
1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable) |
| Zero-shift input |
Input time: 2 ms or more. (or analog output selectable) |
| Control output |
NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of 1 V, 2 outputs (NO or NC selectable) |
| Pressure port |
Rc (PT) 1/8 180 ° rotation |
| Rating |
Power voltage |
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
| Power consumption |
Eco mode |
12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1 |
| Environmental resistance |
Pressure resistance |
500 kPa |
| Ambient temperature |
0 to +50 °C (No freezing) |
| Relative humidity |
35 to 85 % RH (No condensation) |
| Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
| Material |
Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pressure port: Zinc die-casting |
| Accessories |
Power supply cord (2-m with connector) |
| Weight |
Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable) |
