描述
| Model Number | GT2512-STBA GT2512F-STNA | GT2510-VTBA GT2510-VTWA GT2510F-VTNA | GT2508-VTBA GT2508-VTWA GT2508F-VTNA | GT2512-STBD GT2512F-STND | GT2510-VTBD GT2510-VTWD GT2510F-VTND | GT2508-VTBD GT2508-VTWD GT2508F-VTND |
GT2505-VTBD |
|
| Input Power Supply Voltage | 100 to 240VAC (+10%, -15%) | 24VDC (+25%, -20%) | 24 VDC (+10%, -15%) | |||||
| Input Power Supply Frequency | 50/60Hz ±5% | – | ||||||
|
Power Consumption
|
Maximum Load | 35W or less | 34W or less | 31W or less | 37W or less | 33W or less | 31W or less | 8.4 W or less |
| Stand Alone | 14W | 12W | 11W | 13W | 10W | 8W | 4.3 W | |
| Stand Alone with Backlight Off | 7W | 7W | 7W | 6W | 6W | 6W | 2.6 W | |
|
Inrush Current |
60A or less (2ms, ambient temperature 25°C, maximum load) | 5A or less (20ms, ambient temperature 25°C, maximum load) | 42 A or less (2 ms, ambient temperature: 25°C, under the maximum load) | |||||
| Permissible Instantaneous Failure Time | Within 20ms (100VAC or more) | Within 10ms | 10 ms or less | |||||
|
Noise Resistance |
Noise voltage 1500Vp-p, noise width 1μs by noise simulator with noise frequency 25 to 60Hz |
Noise voltage 500Vp-p, noise width 1μs by noise simulator with noise frequency 25 to 60Hz |
Noise voltage: 1000 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency ranging from 30 Hz to 100 Hz | |||||
| Withstand Voltage | 1500 VAC for 1 minute between power supply terminal and ground | 350 VAC for 1 minute between power supply terminal and ground | 500 VAC for 1 minute across power terminals and earth | |||||
| Insulation Resistance | 10MΩ or higher with an insulation resistance tester (500 VDC between power supply terminal and ground) | |||||||
| Applicable Wire Size | 0.75 to 2 [mm²] | |||||||
| Clamp Terminal | Clamp terminals for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A | |||||||
| Tightening Torque (Terminal Block’s Terminal Screws) | 0.5 to 0.8 [N·m] | |||||||
